The Five Common Problems and Repair Issues of Most Water Softeners

Many people all over the world have installed water softeners in their respective households. These pieces of equipment are highly reliable when it comes to effective redressing of water that runs through a home’s plumbing system. With hard water being softened by this equipment, household owners and residents get the opportunity to enjoy cleaner and element-free water supply day in and day out.

However, a water softener may suffer from certain issues that need to be repaired. The following are some of the most common problems which are associated to owning a water softener in your household:

Line Blockage

This problem is self-explanatory. It basically happens when elements such as salt and minerals that flow within the tank tends to accumulate and create buildups and deposits overtime. As a result, these accumulations and deposits cause blockage in the lines. The most common parts of a water softener which are being affected by line blockages are the water line that leads to the tank and the screen filter. So if you notice that the water that circulates in your home is not as soft as what you expect then there might be a blockage that occurred along the lines. This should not cost you too much trouble because this issue is considered as a simple fix and can be remedied by simply following your user’s manual.

Salt Bridge

There are times when salt or sodium chloride which is being used in most water softeners tends to build up in the tank over a period of time. In some extreme situations, these salt formations tend to create a hard deposit or pile and it is usually found at the bottom of the tank. However, when you notice that this problem occurs in your water softener, repairing it should not cost you much worries along the way. All you need is to use something that seems to form like a long crowbar or a broom handle. Make sure that it is long enough to reach the bottom and sturdy enough to scrape off and break the salt deposits below.

Resin Bead Maintenance

In case you are not aware, the resin beads that are found in your water softener simply last a lifetime. But you have to take note that there are certain cases when these resin beads need to be repaired, cleaned or replaced. One way to determine if your resin beads are suffering from a certain problem is when you need to recharge it more than what is being required. If you recharge the unit more frequently then there must be something wrong with its resin beads. If there are particles that float on your soft water then you are highly advised to check your unit’s resin beads because floating particles on water are indications that your resin beads are starting to deteriorate or break down.

Motor Problems

Generally, all water softeners require a motor in order to function and operate. Like any other types of motors which are incorporated in a particular machine, the one that goes with your water softener may also fail over time. So what do you need to check first when your water softener stops to operate momentarily or all of a sudden? Yes, you are right! It pays to check the unit’s motor. And while you are checking and inspecting the motor, be sure to check the cable lines, too. This will give you the idea whether they are properly connected or not. Another thing that you need to do when checking your water softener’s motor is to inspect the unit’s power cord. Cords tend to be easily disconnected so you should be checking them first to ensure easy fixes.

User Error

This is considered as one of the most common issues which are usually encountered when using a water softener in a household. This is especially true when you have a water softener that comes with manual settings. The following are some of the most common problems which are related to incorrect or improper settings and maintenance:

• See to it that your brine tank has ample amount of salt.
• See to it that your settings connive with your user’s manual.
• See to it that the softener wasn’t turned off or suffered from a blown breaker.
• See to it that your settings should not be too low; it should jive well with your water consumption and the level of hardness of the water that needs to be softened.

The easiness of repair procedures may depend on the complexity and build of a particular water softener. While user’s manuals are there to assist you with Do-It-Yourself repairs, dealing with more complex and more complicated issues or problems should be passed to a professional plumber or handyman to ensure effective to excellent repairs along the way.

Updated: June 16, 2017 — 2:57 pm

Leave a Reply

Your email address will not be published. Required fields are marked *

© 2017 Frontier Theme